Solution
HACCP temperature report in transport – what it must contain
What temperature documentation an inspector and a customer expect, and how it differs from two readings written on a delivery note.
What a HACCP report is in transport
HACCP is not a form, it is a system: you identify hazards, set critical control points and prove you keep them under control. The duty comes from Article 5(1) of Regulation (EC) No 852/2004, which requires food business operators to put in place, implement and maintain a permanent procedure based on HACCP principles. In transport, temperature is usually that critical control point, and the temperature report is the evidence that the limit held.
That tells you what an inspection looks for in the paperwork. Not a pretty chart, but three things: whether measurement ran at the right intervals, whether records are dated and kept long enough, and what was done when the limit was breached.
The minimum the rules require
For quick-frozen food the requirements are written out in Commission Regulation (EC) No 37/2005:
- Article 2(1) – means of transport, warehousing and storage fitted with suitable recording instruments monitoring air temperature at frequent and regular intervals
- Article 2(2) – from 1 January 2006 the instruments comply with EN 12830, EN 13485 and EN 13486, and the operator keeps the conformity documents
- Article 2(3) – records dated and kept for at least one year, longer if the nature and shelf life of the food require it
- Article 3 – derogations for retail display cabinets, local distribution and cold stores below 10 m³ in retail outlets
For chilled food, and for ice cream which is not a quick-frozen foodstuff under Directive 89/108/EEC, the operator sets the temperature and the measurement frequency in its own HACCP plan, within the general rules of Regulation 852/2004: the conveyance must maintain an appropriate temperature and allow it to be monitored (Annex II Chapter IV point 7), and the cold chain is not to be interrupted (Annex II Chapter IX point 5).
What a Trackomo report contains
- header: vehicle or site, registration number, date and time range, sensor identifier
- temperature chart with the threshold drawn on it and breaches marked
- measurement table: date, time, value, sensor – one row per record from the device
- list of threshold breaches with start time, duration and peak value
- summary: share of time within limits, minimum, maximum, number of readings
- footer stating who generated the file and when
The daily report sends itself, at the hour and to the addresses you set once in the panel. A report for a single run or any date range is generated on demand – as PDF to show, and as CSV if somebody wants to work the numbers in a spreadsheet.
You can see what it looks like: a sample report from one day of a refrigerated van is available without creating an account.
A breach is not the end of the world
The usual mistake in documentation is hiding breaches. An inspection does not expect a perfectly flat line – it expects a record of what happened and what was done about it. So every breach in the report carries its duration and its place, and the system keeps a trace of the notification: who received it and when.
A three-minute rise during unloading, with a short note on the corrective action, is a normal entry in a HACCP file. A two-hour break in cooling with no note at all is a problem – not because the system recorded it, but because nobody acted on it.
How long records must be kept
For quick-frozen food the minimum is one year, and longer where the shelf life of the goods requires it (Article 2(3) of Regulation 37/2005). In Trackomo readings and routes stay available for a year with no surcharge for the archive. Where the shelf life runs longer, download the reports to your own disk before the year is out.
Questions we get most often
Is a report from an app enough as documentation?
It covers the recording and retention requirements. It does not replace the instrument conformity documents under Article 2(2) of Regulation 37/2005, nor the HACCP procedure itself.
How often do readings have to be taken?
The rule says frequent and regular intervals without naming a number. In practice a record every few dozen seconds or every few minutes raises no questions, while a slip with two readings does.
Can my customer receive the report?
Yes, it is an ordinary PDF. Send it by hand, or add the customer's address to the automatic daily report.
Could the report be forged?
A PDF can be edited like any file, which is why the evidence is the records in the database rather than the file. The measurement history is in the panel and can be regenerated at any time.
Related pages
Try it on your own vehicles
You set the account up yourself, without talking to us. The first 30 days cost nothing.