Solution

Freezer and cold room temperature monitoring

Round-the-clock readings in a freezer, a cold room or a display cabinet, with a phone alert and a report for your HACCP file. In the same panel as the vehicles.

The failure that happens on Friday evening

Cold rooms fail most often when nobody is on site. The unit stops after closing on Friday and the stock is found on Monday morning. What matters is not that the system recorded the failure, but whether somebody learned about it within the first hour and had time to move the goods.

So an alert from a fixed-site sensor has two timings: a short one for the first warning and a longer one for a repeat if nobody responded. Notifications go out as push messages and email to a recipient list set per sensor – one list for the cold room in the plant, another for a cabinet in a shop.

What has to be measured, and how often

For frozen food in storage the same Regulation (EC) No 37/2005 applies as in transport: Article 2(1) requires recording instruments monitoring air temperature at frequent and regular intervals, and Article 2(3) requires the records to be dated and kept for at least a year. Article 3(1) makes an exception for retail display cabinets and local distribution, where at least one easily visible thermometer is enough, and Article 3(2) lets the competent authority grant a derogation for cold store facilities of less than 10 m³ in retail outlets.

In practice the line is simple. A display cabinet in a shop can get by with a thermometer to read; a storage freezer needs a recorder. And if you keep a HACCP file, records from a recorder save hours, because nobody copies readings into a notebook.

How it is installed

On a fixed site the Bluetooth sensor broadcasts its reading and a gateway – a tracker with a SIM card connected to mains power nearby – receives it. One gateway covers sensors within a few dozen metres in open space; the metal walls of a cold room cut that down, so a large warehouse takes two.

The ELA Blue PUCK T EN12830 sensor works from −40 to +85 °C, has an IP68 case and a lithium battery measured in years, so there is no cabling and no drilling through insulation. Where the temperature of the product itself matters, the version with a wired probe is used.

  • storage freezer: one sensor per chamber, near the door
  • vegetable cold room: one sensor, with an upper and a lower threshold
  • shop display cabinet: sensor at the air outlet, at the load line
  • blast chiller: sensor with a probe, because product temperature is the point

One panel for cold rooms and vehicles

The commonest reason companies come to us: they already run two systems and do not want a third. Sensors on site appear in the same panel as the vehicles, with the same alerts and the same report. One PDF can therefore carry both the temperature in the cold room and the temperature on the road – the whole chain from the chamber to the customer.

Fixed sites are billed per sensor, not per location: €2.40 per sensor a month, or €2.10 on yearly billing. Ten sensors across three shops means paying for ten sensors, that is €24 a month.

What this system will not do

  • It will not restart the unit. It will tell you and record how the failure unfolded.
  • It does not replace the sensor conformity documents Article 2(2) of Regulation 37/2005 asks you to keep.
  • It will not measure product temperature if the sensor hangs in the air. That is what the probe version is for.
  • It does not make phone calls. It sends push notifications and email.

Questions we get most often

What happens if the internet or the power fails?

The gateway has its own SIM, so it does not depend on company Wi-Fi. If mains power goes, it stops reporting and after the time you set you get a no-signal alert – which also tells you the site has no power.

How many sensors fit on one gateway?

A dozen or so in a typical layout. Bluetooth range in your particular building decides, which is why it is worth placing the first sensor as a test before ordering the rest.

Does a cold room report look like a vehicle report?

Yes, it is the same template: chart with the threshold, measurement table, list of breaches with durations. Instead of a route there is the site name.

Can thresholds differ between day and night?

Yes, a threshold schedule is set per sensor. It is useful in shops where a cabinet is covered overnight.

Related pages

Try it on your own vehicles

You set the account up yourself, without talking to us. The first 30 days cost nothing.